button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Flowfit CPA25 - Flow assembly with splash protection cap

Flow assembly
Flowfit CPA25

Universal assembly for the water and wastewater industry and industrial auxiliary processes.

CPA25
Nalaganje cene
Cene trenutno niso na voljo
Price on request
from CHF ??.-
Flowfit CPA25 - Flow assembly with splash protection cap
  • F
  • L
  • E
  • X
©Endress+Hauser
Flowfit CPA25 Universal assembly for the water and wastewater industry
  • F
  • L
  • E
  • X
©Endress+Hauser
Flowfit CPA25 assembly with three Pg 13.5 sensor slots.
  • F
  • L
  • E
  • X
©Endress+Hauser
Flowfit CPA25 - Flow assembly with compact transmitter and pH sensor
  • F
  • L
  • E
  • X
©Endress+Hauser

Lastnosti na dlani

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

Področje uporabe

The Flowfit CPA25 flow assembly is designed for the realization of measuring points in water and wastewater treatment and industrial auxiliary processes. It offers space for three sensors and is able to extend their service life by keeping them wet even when the flow is interrupted. The assembly itself is also durable thanks to corrosion-resistant polypropylene. With Flowfit you get the right product exactly for your standard applications.

Flowfit CPA25 can be used in many applications in industrial auxiliary processes as well as in water and wastewater treatment. It is intended to be used in the following applications among others:

  • Drinking water

  • Water and wastewater treatment

  • Water cooling circuits

  • Osmosis plants

It is suitable for use with pressures of up to 6 bar.

Prednosti

  • Compact assembly with three Pg 13.5 sensor slots.

  • Special flow geometry to achieve reliable and stable
    measured values from the installed sensors.

  • Siphon type profile to protect the sensors from drying out
    during plant shutdown.

  • Service cover facilitates cleaning of the sensors and
    assembly.

  • Calibration of the sensors to check they are functioning
    correctly can take place while installed.

Segment Lean

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

FLEX: Lean ©Endress+Hauser

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo
Loading alternative products

Predhodnik

Zgodbe o uspehu

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .