Lastnosti na dlani
-
Measured variables
NO, NO2, NH3, SO2
-
Process temperature
≤ +550 °C
-
Ambient temperature range
–20 °C ... +55 °C
Temperature change maximum ±10 °C/h -
Hazardous area approvals
IECEx: Ex pzc op is [ia] IIC T3 Gc
ATEX: II 3G Ex pzc op is [ia] IIC T3 Gc
Področje uporabe
The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, pressure and temperature in the gas duct. Direct, fast and without gas sampling and transport. Due to self-monitoring, the measured values are reliable. In case of a malfunction, an early warning will be shown. For emission measurement of SO2 and NO, the GM32 is tested for suitability according to European standard EN 15267. An Ex-type with extensive safety functions and sophisticated system technology is also available.
For monitoring and control in flue gas purification, such as denitrification plants, desulfurization plants and converters
Emissions monitoring according to EU directives or local regulations
Device properties:
No gas sampling, no gas transport, no gas conditioning
Up to four measurands at the same time, plus process temperature and pressures
Numerous independent measuring ranges with consistent accuracy
Automated self-test function (QAL3) without test gases
Overpressure encapsulated type Ex-zone 2
Prednosti
Nearly uncompromised measured values measured directly in the gas duct
Short-term process deviations can be measured
Representative measurement by selection of cross-duct or measuring probe type
Fast on-site service possible due to modular design
Long maintenance-free intervals
Cost-effective in-situ gas analyzer — Ex-type also available
Low cost of installation and operation, no test gases required
Segment Xpert
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
-
Standardni produkti
- Zanesljivi, robustni, nezahtevni za vzdrževanje
Tehnična odličnost
Preprostost
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
| FLEX izbira | Tehnična odličnost | Preprostost |
|---|---|---|
Segment Fundamental Zadostite svojim osnovnim merilnim potrebam |
Tehnična odličnost
|
Preprostost
|
Segment Lean Obvladajte ključne procese na preprost način |
Tehnična odličnost
|
Preprostost
|
Segment Extended Optimirajte procese z inovativnimi tehnologijami |
Tehnična odličnost
|
Preprostost
|
Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije |
Tehnična odličnost
|
Preprostost
Spremenljivo |
Loading alternative products
Zgodbe o uspehu
Morda vas zanima tudi
-
-
Navodila za uporabo (BA)
GM32
In-situ Gas Analyzer, Cross-Duct Version
EN SL 01/01/2025Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
3.9 MB
Ime datoteke:
8029940_ZVF9_OI_GM32_CrossDuct_en_V2-1_2019-04_EHS.pdf
-
-
-
Navodila za uporabo (BA)
GM32
In-situ Gas Analyzer, Measuring Probe Version
EN SL 01/01/2025Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
3.9 MB
Ime datoteke:
8029938_ZVF9_OI_GM32_Probe_en_V2-1_2019-04_EHS.pdf
-
-
-
Industrijske rešitve (SO)
Chemicals, petrochemicals and refineries – solutions for the chemical processing industry
Endress+Hauser offers a broad product portfolio of continuous gas analyzers using state-of-the-art technologies.
Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
3.1 MB
Ime datoteke:
8030415_SO_CPR_en_V1-0_2025.01_EHS.pdf
-
-
-
Industrijske rešitve (SO)
Broad range of solutions for waste-to-energy plants
Endress+Hauser offers ideal automation and safety solutions for collection, sorting and recycling of waste.
Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
2.4 MB
Ime datoteke:
8030416_SO_Waste_en_V1-0_2025.01_EHS.pdf
-
-
-
Industrijske rešitve (SO)
Broad range of solutions for gas-fired power plants
With our broad range of solutions Endress+Hauser has proven applicability in the entire power generation process, from gas flow to
combustion efficiency to emissions monitoring.Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
4.1 MB
Ime datoteke:
8030417_SO_Power_en_V1-0_2025.01_EHS.pdf
-
-
-
Brošura za področje dejavnosti (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceJezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
4.5 MB
Ime datoteke:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
Inovacija (IN)
GM32 – in-situ gas analyzer for efficient measurement of SO2, NO, NO2, NH3
The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, pressure and temperature in the gas duct.
Jezik:
angleščina
Verzija:
01/01/2025
Velikost datoteke:
4.9 MB
Ime datoteke:
8029968_IN_GM32_en_V3-0_2025.01_EHS.pdf
-
-
-
Preverjanje DTM
GM32 SDD file
SOPAS device description file for GM32
Jezik:
Jezikovno neodvisno
Verzija:
10/04/2017
Velikost datoteke:
711 KB
Ime datoteke:
GM32 SDD file
-
